| Spray Pattern |
Category |
Spray Angles |
Flow Rate Range |
 |
"H" - Hollow Cone - Red Caps
This series distributes the atomized oil particles evenly toward the outside of the the spray cone. These nozzles are particularly well suited for low firing rates and burners with hollow air pattern. Normally used in wider spray angles.
|
30°
45°
60°
70°
80°
90°
|
.65 - 9.00 GPH
.40 - 9.00 GPH
.40 - 9.00 GPH
.40 - 9.00 GPH
.40 - 9.00 GPH
.50 - 9.00 GPH
|
| |
 |
""EH" - Extra Hollow Cone - Red Caps
This type "EH" is an extension of our hollow cone series. Available from 4.00 GPH through 30.00 GPH. It is specified in many commercial applications.
|
45°
70°
|
4.00 - 30.00 GPH
4.00 - 30.00 GPH
|
| |
 |
"S-S" - Semi Solid Cone - Blue Caps
Most suitable for general applications where exact air pattern or spray pattern requirements can't be established. Droplet distribution is relatively even across spray cone in smaller flow rates, but becomes more hollow as flow rates increase.
|
30°
45°
60°
70°
80°
90°
|
.65 - 20.00 GPH
.40 - 35.00 GPH
.40 - 35.00 GPH
.40 - 35.00 GPH
.40 - 35.00 GPH
.50 - 20.00 GPH
|
| |
 |
"B" - Solid Cone - Black Caps
Designed to give optimum combustion efficiency on high static pressure flame retention burners which specifically a "B" pattern. As compared to our "ES" pattern, somewhat more fuel is concentrated towards the center of the spray.
|
30°
45°
60°
70°
80°
90°
|
.40 - 2.00 GPH
.40 - 2.00 GPH
.40 - 2.00 GPH
.40 - 2.00 GPH
.40 - 2.00 GPH
.40 - 2.00 GPH
|
| |
 |
"ES" - Solid Cone - Green Caps
Our original solid cone series for low flow rates. Available for applications specifying a solid "ES" pattern.
|
30°
45°
60°
70°
80°
|
.40 - 1.75 GPH
.40 - 1.75 GPH
.40 - 1.75 GPH
.40 - 1.75 GPH
.40 - 1.75 GPH
|
| |
 |
"P" - Solid Cone - Green Caps
The "P" type is an extension of our "B" and "ES" series for firing rates of 2.00 GPH and above. It produces a solid cone pattern in the low rates and becomes more hollow as the flow rate increases. Specially designed with a pocketed disc to reduce combustion noises and pulsation.
|
30°
45°
60°
70°
80°
|
2 - 15.00 GPH
2 - 15.00 GPH
2 - 15.00 GPH
2 - 15.00 GPH
2 - 15.00 GPH
|
| |
 |
"LC" - Large Capacity - Blue Caps
These nozzles are uniquely designed for outstanding combustion in large commercial burners. They have large internal passageways to accommodate high flow rates. They produce a semi-solid "universal" pattern.
|
45°
60°
80°
|
35 - 120.00 GPH
35 - 120.00 GPH
35 - 120.00 GPH
|
| |
 |
"W" - Universal Nozzle - Orange Caps
For installations where the use of a defined hollow or solid nozzle does not provide the combustion result desired.
|
30°
45°
60°
70°
80°
90°
|
.65 - 8.00 GPH
.40 - 8.00 GPH
.40 - 8.00 GPH
.40 - 8.00 GPH
.40 - 8.00 GPH
.50 - 8.00 GPH
|
| |
 |
"DFN" - Dual Filtration - White Caps
Available in hollow (DFN-H) and solid cone (DFN-B) patterns, the DFN nozzles give enhanced protection against clogging in the very low rates.
|
45°
60°
70°
80°
|
.30 - 1.00 GPH
.30 - 1.00 GPH
.30 - 1.00 GPH
.30 - 1.00 GPH
|
| |
 |
"Siphon" Nozzle - Gray Caps
Air atomizing nozzle for the combustion of waste oil and other variable waste oil products.
|
3PSIG-Air
4PSIG-Air
5PSIG-Air
|
.20 - 1.00 GPH
.20 - 1.00 GPH
.30 - 1.00 GPH
|
